Clear Low Temperature Polyurethane TPU Hot Melt Adhesive Film For Leather
Hot Melt Adhesive Film Product: DS8610
Hot Melt Adhesive Film Description:
This product is a thermoplastic material, for a variety of materials can be applied to the hot melt adhesive, It can repeatedly heated plastic bonding. This kind of hot melt adhesive has good adhesion to textile, polyester, cotton, blended fabric, TPU, PVC, PC / ABS, and has good resilience, elasticity, heat resistance, cold resistance and water resistance .
Hot Melt Adhesive Film Composition:
Polyurethane
Hot Melt Adhesive Film Physical Characteristics:
| Color | transparent | Release Liner | Glassine release paper |
| Density | 1.20±0.02g/cm3 | Thickness | 0.0125mm-1mm |
| Opening Time | 5min | Width | 5mm-1480mm |
| Hardness | 97±2Shore A | Conventional thickness | 0.05mm,0.08mm |
| Melt Flow Index | 33±5g/10min; Condition:ASTMD1238-04 | Conventional Width | 1380mm |
| Rheology Temperature | 60°C | Length | 100 yards |
| Operating Temperature | 90°C -130°C | Finished Products specification | 1380mm*100yards/roll |
Recommended Bonding Conditions:
| Flat Press | Second Flat Press |
| Machine Setting: 80℃-100℃ | Machine Setting: 90℃-130℃ |
| Dwell Time: 5-15 seconds | Dwell Time: 8-25seconds |
| Pressure: 0.3-0.6mpa | Pressure: 0.3-0.6mpa |
1,Bonding temperature and pressure as well as the time involved in the strength of the film to material. Bonding temperature must be close to the machine set the temperature, the pressure must be uniform, mold and pressure roller must be flat.
2,In different machinery and materials, the bonding conditions used will be different. The conditions marked here are only basic. The optimum bonding conditions should be made by creating suitable construction conditions for the particular applicationdamage, direct or consequential, arising out of the use, misuse or inability to use the product.
NOTICE: Seller hereby excludes any express warranties and the implied warranties of merchantability and fitness for a particular purpose. The following is made in lieu of any such warranties. Tunsing believes the information supplied are reliable, but does not guarantee that any results shown or claimed will be obtained. Before using the user shall determine the suitability and fitness of the product for its intended use. The user assumes all risks and liability whatever in connection with its own tests and use. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use, misuse or inability to use the product.
Company Information
Shenzhen Tunsing Plastic Products Co., Ltd., founded in 2007. Ten years of hot melt adhesive polymer technology team, professional development course, set the development, production, sales as one. The company has passed ISO9001:2008 certification system. From raw materials to the production of R & D and production of the film are strictly implement ISO9001 system control standards.
Tunsing: hot melt adhesive bonding materials, metal. Plastic cement. Cloth and so on, hot melt decorative film, double-sided adhesive film, seamless zipper tape and other waterproof materials, full range, quality and stability. Can be widely used in non-woven fabric, nylon PU, PVC and other advanced raincoat, windbreakers, ski suit, diving suits, protective clothing, car cover, nonwoven products, tents, and all kinds of waterproof clothing cover products such as needle every mouth waterproof processing, is the preferred product of extensive waterproofing products factory, garment factory, shoe factory, medical supplies factory.
The company operating in the industry for more than 10 years, have a good reputation, strong technical force, has a perfect after sale service outlets to ensure on-time delivery nationwide, providing repair and operation technology and quality assurance.
Hot Melt Adhesive Film Packaging & Shipping
Hot Melt Adhesive Film Application
DS8610 development direction and application is for clothing, shoes, textile accessories, handbags, luggage, ipad protective cover, mobile phone protective cover, sports equipment and other materials bonding.
Hot Melt Adhesive Film Certifications
Our Services
1, Your inquiry will be replied within 24 hours and online service is available all the time.
2, Well-trained & professional sales persons are here ready to answer all your questions and handle the problems.
3, Prompt delivery time: within 15 days after agreement
4, Flexible payment terms: T/T, L/C, O/A, Western Union, Paypal, Escrow, etc.
5, Your business relationship with us will be confidential to any third party.
6, Good after-sale service offered, please get back if you got question.
FAQ
1, Q: How will you pack the product?
A: We pack with paper cartons, usually 4 or 6 rolls per carton for hand stretch film; 1 roll for machine stretch film; 56 or 84 rolls for mini stretch film and 27 rolls per pallet for jumbo stretch film.
2, Q: How many rolls can be full fitted into one container, such as 20FT, 40FT?
A: The details are in the above forms. If your specification is different, you need to tell us the size of the carton, and then we will calculate for you accordingly.
3, Q: How about the adhesive of the stretch film?
A: It is self adhesive stretch film. We can produce one side and two sides adhesive but usually one side adhesive. Besides, the stickiness can be controlled as customized.
4, Q: How many layers of the stretch film can your equipment make?
A: Our equipment can produce 1/2/3 layers stretch film.
5, Q: Do you accept OEM?
A: Yes, we do.
6,Q: What’s your payment term?
A: We accept T/T, L/C, O/A, Western Union, Paypal, Escrow, or customized if it is acceptable.
Cnotace Me
Tel&whatsapp:+ 86 181 2626 6193
Product Tags:
|
|
Polyurethane Hot Melt Adhesive Sheets For Leather , Low Temperature 60℃ Images
|
